GD 2002 INDUCTIVE PASSWORD CHECKER
GD 2002 INDUCTIVE PASSWORD CONTROLLER.CHECKER
1.999 sheet of cards can be accepted , and can expand to 4000 sheet of cards.
2. easy use and programme .voice and light can be answered.
3.3 different work way, inductive card, CRYPTOGRAPHIC card, and password.
4.time of open door can be set by yourself from 3 second begin.
5.directly output signal. Easy work with, and connect with automatic door, lock-open,
6.distance of card reader : no less than 10cm.
7.easy use, convenient increase and decrease cards, with the function of warning, anti- pry-up. 8.voltage:DC 12. Quiescent current below 50mA.
9.work temperature: from ¨C30 degree to 70 degree.
10.size:116cm(L)*116mm(w)*20mm(H)
11.time of lock-open: 0 to 255 second.

GD-2001 microwave automatic door sensor
GD-2001microwave automatic door sensor POWER SUPPLY : AC/DC 9V-AC/DC 24V
MAINS FREQUENCY :50-60HZ
FREQUENCY:10.525GHZ ETC.
FUNCTION INDIDATION: LED
TIME DELAY: 0.5 SEC
RENGE(LEVER 1-3)):1.2M-2.0M
OPERATING TEMP:25-60
DETECTION ANG LE:40-160
COVER COLOR: SILVER OR BALCK
WEIGHT:120G
SIZE: 140-63-43MM
MOUNTING HEIGHT:2.0M-2.5M
MOUNTING STYLE: WALL

GD2004 foot sensor

 

* It attaches the Microwave Sensor which uses a RF.
* The up-to-date sense which uses Doppler Principle.
* Narrow and wide beam pattern selection funtion.
* Low Cost & Low Power Consumption.
* Suitable for external/Internal automated door.
* The detection angle can be adjusted.
* ABS enclosure with clear view of indicator Led.
Technology & Certification
As the RF microwave sensor module which uses the Doppler principal
which it develops at the domestic beginning patent it made an
application.


GD-2009 microwave sensor
POWER SUPPLY : AC/DC 9V-AC/DC 24V
MAINS FREQUENCY :50-60HZ
FREQUENCY:10.525GHZ ETC.
FUNCTION INDIDATION: LED
TIME DELAY: 0.5 SEC
RENGE(LEVER 1-3)):1.2M-2.0M
OPERATING TEMP:25-60
DETECTION ANG LE:40-160
COVER COLOR: SILVER OR BALCK
WEIGHT:120G
SIZE: 140-63-43MM
MOUNTING HEIGHT:2.0M-2.5M
MOUNTING STYLE: WALL

GD -2008 Safety Beams
safety beam is a miniature photoelectric safety thru-beam sensor designed for automatic door control and is also similarly suited for other applications such as garage doors ,gate operators, etc. as a safety or primary control device where a narrow field of detection is required. Each set consists of a controller,equipped with one or two pairs of emitter/detector sensor. if persons or obstruction block the infrared beam when the door is falling or close. the door will reverse to maximal extension, keeping your car and faily safe.
Main Features
1.Miniature sensor head & compact controller and Installation flexibility for unlimited applications. 2.Single or double Microcells available . 3.Sensor head can be separated from
shielded wire at the plugs for easy installation. 4.Available with short or long cables . 5.Microprocessed active infrared . 6.Low power consumption. 7.12V-24V AC/DC Univeral power input.

GD2007 electric bolt
wide voltage power to lock with magnetic switch for sensoring to lock signal output .delay time(0/3/6/9)s,operational temperature(normal atmospheric temperature+5) . voltage 10-26VDC,working current 650mA,standby current 180mA., Application all type of door no fame door can choose bracket . swinging door,180 degree, holding force:100kg. size:220*35*38mm

Gd 2005: Microwave Contactless Switch
Gd 2005: Microwave Contactless Switch
touchless switches are Microwave devices designed to activate full and low energy automatic doors. Their hands free operation makes them ideal for ADA applications. Other applications include clean-room access points, request-to-exit devices (3 amp contact) and point-of-purchase displays. The SAD-410-2 is microprocessor controlled allowing for superior operation in a smaller unit.
Main Features

Microwave motion sensor used as contactless switch; Avoids any contact with hands or elbows for absolute hygiene; Adjustable sensing field, between 5 and 50 cm ;
Can be completely recessed into any surface;
Can be used in "SENSOR"mode or in "SWITCH" mode;
Insensitive to color, temperature or reflection from the target;

GD2011 DOOR CLAMPER

GD 2010 BACKUP POWER BETTERY

GD2003 HAND-PRESS SWITCHER

GD2012 BANK CARD READER

5 FUNCTION SWITCHER

FOOT SENSOR

 

 

 

 

Resolution ratio:1024*768 emai: coinmech@gmail.com ZHEJING GANGDU ELECTRONIC CO,.LTD copyright:@2000